Bricks Bonding - Printable Version

+- Front Desk Architects and Planners Forum (https://frontdesk.co.in/forum)
+-- Forum: Architecture and Planning (https://frontdesk.co.in/forum/forumdisplay.php?fid=1)
+--- Forum: Study Resource (https://frontdesk.co.in/forum/forumdisplay.php?fid=114)
+---- Forum: Construction (https://frontdesk.co.in/forum/forumdisplay.php?fid=6)
+----- Forum: Wall Systems (https://frontdesk.co.in/forum/forumdisplay.php?fid=25)
+----- Thread: Bricks Bonding (/showthread.php?tid=126)

---

Bricks Bonding - Amit Mathur - 04-17-2014

There are three types of brick bondings viz;

Flemish Bond



Alternate bricks are placed as header and stretcher in every course. Each header is placed centrally between the stretcher immediately above and below. This is not as strong as the English bond at 1 brick thick.

English Bond



Alternative courses of headers and stretchers; one header placed centrally above each stretcher. This is a very strong bond when the wall is 1 brick thick (or thicker). One of the strongest brickwork bond patterns.

Stretcher Bond



Easiest bond to lay & minimizes the amount of cutting required Originally used for single brick walls, now called 1/2 brick walls it became the obvious choice for cavity walls as less cutting was required.

---