Front Desk Architects and Planners Forum
CONVENTIONAL (STICK) CURTAINWALL SYSTEM - Printable Version

+- Front Desk Architects and Planners Forum (https://frontdesk.co.in/forum)
+-- Forum: Architecture and Planning (https://frontdesk.co.in/forum/forumdisplay.php?fid=1)
+--- Forum: Study Resource (https://frontdesk.co.in/forum/forumdisplay.php?fid=114)
+---- Forum: Construction (https://frontdesk.co.in/forum/forumdisplay.php?fid=6)
+----- Forum: Structural Glazing Systems (https://frontdesk.co.in/forum/forumdisplay.php?fid=24)
+----- Thread: CONVENTIONAL (STICK) CURTAINWALL SYSTEM (/showthread.php?tid=2539)


CONVENTIONAL (STICK) CURTAINWALL SYSTEM - Amit Mathur - 11-09-2018

CONVENTIONAL (STICK) CURTAINWALL SYSTEM
In this system the wall is installed piece by piece. Usually the mullion members are installed first, followed by transoms (horizontal members), the panels, and finally the glazing or window units. Typical elevation of a 'conventional' type glazed curtainwall is shown in below Figure.

[Image: image-8.png]
CONVENTIONAL CURTAIN WALL SYSTEM  HORIZONTAL SECTION (COURTESY: SP FABRICATORS PVT LTD.)

[Image: image-9.png]
CONVENTIONAL CURTAIN WALL SYSTEM HORIZONTAL SECTION 
(COURTESY: SP FABRICATORS PVT LTD.)

To Read more...
.pdf CONVENTIONAL (STICK) CURTAINWALL SYSTEM.pdf Size: 1,003.82 KB  Downloads: 31


Taken from  Handbook of BUILDING CONSTRUCTION (Vol. 2) - The Essential Source of MODERN CONSTRUCTION Practices, Materials & Equipment by M.M.Goyal 




register as member and login to download attachment [pdf] by right-click the pdf link and Select “Save link as” use for Educational Purposes Only