Fineness Modulus for Aggregates - Printable Version
+- Front Desk Architects and Planners Forum (https://frontdesk.co.in/forum)
+-- Forum: Architecture and Planning (https://frontdesk.co.in/forum/forumdisplay.php?fid=1)
+--- Forum: Study Resource (https://frontdesk.co.in/forum/forumdisplay.php?fid=114)
+---- Forum: Materials (https://frontdesk.co.in/forum/forumdisplay.php?fid=7)
+----- Forum: Fine and Coarse Aggregates (https://frontdesk.co.in/forum/forumdisplay.php?fid=83)
+----- Thread: Fineness Modulus for Aggregates (/showthread.php?tid=526)
+- Front Desk Architects and Planners Forum (https://frontdesk.co.in/forum)
+-- Forum: Architecture and Planning (https://frontdesk.co.in/forum/forumdisplay.php?fid=1)
+--- Forum: Study Resource (https://frontdesk.co.in/forum/forumdisplay.php?fid=114)
+---- Forum: Materials (https://frontdesk.co.in/forum/forumdisplay.php?fid=7)
+----- Forum: Fine and Coarse Aggregates (https://frontdesk.co.in/forum/forumdisplay.php?fid=83)
+----- Thread: Fineness Modulus for Aggregates (/showthread.php?tid=526)
Fineness Modulus for Aggregates - sushil35 - 08-08-2014
Fineness Modulus for Aggregates
FM
![[Image: fm.png]](http://www.frontdesk.co.in/big/cm/fm.png)
The fineness modulus (FM) for both fine and coarse aggregates is obtained by adding the cumulative percentages by mass retained on each of a specified series of sieves and dividing the sum by 100.
The FM is an index of the fineness of the aggregate. The higher the FM, the coarser the aggregate. FM of fine aggregate is useful in estimating proportions of fine and coarse aggregate in concrete mixtures.