Bitumen felt ( plastomeric system) - Damp proofing material - Printable Version

+- Front Desk Architects and Planners Forum (https://frontdesk.co.in/forum)
+-- Forum: Architecture and Planning (https://frontdesk.co.in/forum/forumdisplay.php?fid=1)
+--- Forum: Study Resource (https://frontdesk.co.in/forum/forumdisplay.php?fid=114)
+---- Forum: Materials (https://frontdesk.co.in/forum/forumdisplay.php?fid=7)
+----- Forum: Insulation Materials (https://frontdesk.co.in/forum/forumdisplay.php?fid=69)
+----- Thread: Bitumen felt ( plastomeric system) - Damp proofing material (/showthread.php?tid=666)

---

Bitumen felt ( plastomeric system) - Damp proofing material - manishthak - 08-16-2014

Bitumen felt ( plastomeric system).IS Code of Practice 1346

Many Type of Bituminuous sheet are used for water proofing works mainly two type of plastic based bitumen sheet are available :

Traditional felt : Which is to be stuck to the surface to be waterproofed with hot blown asphalt

Thermofusible film : sheet with underside of thermofusible film which can be heated by gas flame torch and then stick to the hot surface.

Major disadvantage : most of these membranes last only five to six years and we have to remove old and reinstall new system



MARKET PRODUCT :

UNIFELT : bituminous felt

UNIPLASTIFELT : It consists of a centre core of 25 microns thick high molecular high density polythyene film.

By UNITED TAR (P) LTD.

6 mm thick bitumen sheet available in roll form

---