10-14-2014, 11:01 AM
Cover block recommended with Reinforcement Bars
Use of cover blocks are highly recommended to ensure that adequate concrete covers the steel bars. Cover blocks are normally made using mortar and should be of a thickness of 2 inch for footing, 1.5 inch for columns and ½ to ¾ inch for slab and beam structures.
Use of cover blocks are highly recommended to ensure that adequate concrete covers the steel bars. Cover blocks are normally made using mortar and should be of a thickness of 2 inch for footing, 1.5 inch for columns and ½ to ¾ inch for slab and beam structures.