10-26-2018, 10:43 AM
The process followed in Roof insulation using Earthen pots is:
1. Clean the roof surface thoroughly , no dust particle should be present
2. Apply 4 - 5 mm of Epoxy based waterproofing with Fibre glass reinforcement
3. Place inverted earthen pots (diameter - 7" and depth 3") on wet cement mortar (Cement
and ratio is 1:4)
3. Fill the void Void space between the earthen pot with mortar bed, till about mid of the pot.
4. Leave it curing for a day.
5. Finish the surface with 30 mm Cement Flooring (cement: sand: aggregate ratio is 1:2:4)
6. Make a 20 mm cement mortar bedding (cementand ratio is 1:4)
7. Lay it with China mosaic tiling.
8. Fill the joints in tiles with white cement slurry and wash the finished surface and clean with water
1. Clean the roof surface thoroughly , no dust particle should be present
2. Apply 4 - 5 mm of Epoxy based waterproofing with Fibre glass reinforcement
3. Place inverted earthen pots (diameter - 7" and depth 3") on wet cement mortar (Cement
and ratio is 1:4)3. Fill the void Void space between the earthen pot with mortar bed, till about mid of the pot.
4. Leave it curing for a day.
5. Finish the surface with 30 mm Cement Flooring (cement: sand: aggregate ratio is 1:2:4)
6. Make a 20 mm cement mortar bedding (cement
and ratio is 1:4)7. Lay it with China mosaic tiling.
8. Fill the joints in tiles with white cement slurry and wash the finished surface and clean with water