इंद्र, यम और राज से सीढ़ियों की संख्या की गणना
भारतीय वास्तुशास्त्र में भवन निर्माण से संबंधित अनेक सूक्ष्म सिद्धांत बताए गए हैं। इनमें केवल दिशा, द्वार या कमरों का विन्यास ही नहीं, बल्कि छत की संरचना, कड़ियों, शहतीरों तथा बीमों की संख्या तक का भी विशेष महत्व माना गया है। इसी संदर्भ में “इंद्र”, “यम” और “राज” पदों का उल्लेख वास्तु ग्रंथों में प्राप्त होता है। सामान्यतः लोग इन सिद्धांतों को सीढ़ियों से जोड़ देते हैं, जबकि वास्तुशास्त्र के मूल ग्रंथों में इनका प्रयोग मुख्य रूप से भवन की छत अथवा उस पर आधारित संरचनात्मक तत्त्वों की गणना में बताया गया है। यह बात बिल्कुल सही है कि इनका मुख्य अनुप्रयोग सीढ़ियों की संख्या गिनने के बजाय मुख्य रूप से छतों, बरामदों या भवन के बड़े हिस्सों के स्तंभों (pillars) या बीम की गणना और उनके संयोजन में किया जाता है।
In Vastu Shastra, many subtle principles related to building construction are described. These principles are not limited only to directions, entrances, or room arrangements, but also extend to the structural design of roofs, including the number of rafters, beams, and girders used in a building. In this context, the concepts of Indra, Yama, and Raja positions are mentioned in traditional Vastu texts. These principles are often mistakenly associated with staircases, whereas classical Vastu literature primarily applies them to the structural members used in roofs and ceilings.
प्राचीन समय में भवनों की छतें लकड़ी, पत्थर अथवा अन्य पारंपरिक सामग्री से बनाई जाती थीं। उस समय छत को सहारा देने के लिए कड़ियां (rafters), शहतीर (beams) तथा अन्य आधार संरचनाएँ प्रयुक्त होती थीं। वास्तु के अनुसार इन संरचनात्मक सदस्यों की संख्या का मानसिक, ऊर्जात्मक और प्रतीकात्मक प्रभाव भवन तथा उसमें निवास करने वालों पर पड़ता है। इसी कारण उनकी संख्या की गणना कर यह देखा जाता था कि वह “इंद्र पद”, “यम पद” अथवा “राज पद” में से किस श्रेणी में आती है।
In ancient construction methods, roofs were commonly built using wood, stone, or other traditional materials. To support the roof, structural elements such as rafters, girders, and beams were used extensively. According to Vastu principles, the number of these structural members was believed to influence the energy, harmony, and prosperity of the building and its occupants. Therefore, their number was carefully calculated and categorized into positions known as Indra Pada, Yama Pada, and Raja Pada.
इन पदों में “इंद्र” को समृद्धि, प्रतिष्ठा और सुख का प्रतीक माना गया है, “राज” पद को वैभव, उन्नति और अधिकार का सूचक माना जाता है, जबकि “यम” पद को कष्ट, बाधा अथवा अशुभ फल देने वाला माना गया है। वास्तु परंपरा के अनुसार यदि किसी कक्ष या भवन में प्रयुक्त कड़ियों, बीमों या शहतीरों की संख्या विशेष गणना के आधार पर 2, 5, 8, 11, 14, 17, 20, 23 आदि पर समाप्त होती है, तो उसे अशुभ अथवा “यम पद” की श्रेणी में माना जाता है। ऐसी स्थिति में वास्तु विशेषज्ञ प्रायः एक बीम, कड़ी या शहतीर कम अथवा अधिक करने की सलाह देते हैं, जिससे संख्या शुभ पद में परिवर्तित हो जाए।
Among these, Indra is considered a symbol of prosperity, honor, and happiness, while Raja signifies growth, authority, and success. On the other hand, Yama Pada is traditionally regarded as inauspicious and associated with obstacles or unfavorable results. According to Vastu calculations, if the number of beams, rafters, or girders in a room or structure ends at counts such as 2, 5, 8, 11, 14, 17, 20, 23, and so on, it is considered unfavorable and categorized under Yama Pada. In such cases, Vastu experts traditionally recommend increasing or decreasing the number by one so that the count shifts into a more auspicious category.
यह ध्यान देने योग्य है कि यह सिद्धांत मुख्यतः उन भवनों पर लागू होता था जिनमें छत का भार अलग-अलग कड़ियों और शहतीरों पर आधारित होता था। प्राचीन भारतीय स्थापत्य में यह व्यवस्था सामान्य थी, इसलिए वास्तुशास्त्र में इसकी विस्तृत चर्चा मिलती है।
It is important to understand that these principles were primarily relevant in traditional architectural systems where roofs depended on multiple wooden or stone structural members. Since such construction methods were common in ancient Indian architecture, Vastu texts discuss these calculations in detail.
त्रिगुणात्मक सिद्धांत की गणना
इस व्यवस्था में किसी भी निर्माण के मुख्य तत्वों (जैसे स्तंभ, बीम या खुली छत के खंड) को १, २, ३ के चक्र में गिना जाता है:
- १ = इंद्र (या देव/राजा): यह ऐश्वर्य, समृद्धि, सकारात्मक ऊर्जा और वृद्धि का प्रतीक माना जाता है।
- २ = यम: यह क्षय, मृत्यु, रुकावट या नकारात्मक ऊर्जा का प्रतीक माना जाता है।
- ३ = राज (या मानव/सामान्य): यह स्थिरता, संतुलन और सांसारिक गतिविधियों का प्रतीक माना जाता है।
आधुनिक निर्माण पद्धति में स्थिति काफी बदल चुकी है। आज अधिकांश आवासीय भवनों में आर.सी.सी. (RCC) लैंटर प्रणाली का उपयोग किया जाता है, जिसमें पूरी छत एक साथ कंक्रीट स्लैब के रूप में डाली जाती है। ऐसे निर्माण में पारंपरिक कड़ियों और शहतीरों का प्रयोग लगभग समाप्त हो गया है। इसलिए सामान्य घरों में इंद्र, यम और राज पदों की यह गणना व्यावहारिक रूप से कम प्रासंगिक रह गई है।
In modern construction practices, however, the situation has changed considerably. Today, most residential buildings are constructed using RCC (Reinforced Cement Concrete) slab systems, where the entire roof is cast as a single concrete slab. As a result, the traditional use of separate rafters and wooden girders has largely disappeared from ordinary houses. Therefore, the application of Indra, Yama, and Raja calculations has become less relevant in modern residential construction.
फिर भी बड़े शोरूम, मैरिज होम, ऑडिटोरियम, औद्योगिक भवनों तथा विशाल संस्थानों में आज भी बड़े स्पैन को सहारा देने के लिए स्टील या कंक्रीट बीमों का व्यापक प्रयोग होता है। ऐसे निर्माणों में कुछ वास्तु विशेषज्ञ आज भी बीमों की संख्या और उनके विन्यास को ध्यान में रखते हैं। हालांकि आधुनिक स्थापत्य और इंजीनियरिंग में संरचनात्मक सुरक्षा, भार-वितरण तथा वैज्ञानिक डिज़ाइन को प्राथमिकता दी जाती है, फिर भी पारंपरिक मान्यताओं के कारण अनेक लोग वास्तु सिद्धांतों का समन्वय करके निर्माण कराना उचित समझते हैं।
Nevertheless, in large structures such as showrooms, marriage halls, auditoriums, industrial buildings, and institutional complexes, beams and large-span structural systems are still widely used. In such projects, some Vastu practitioners continue to consider the number and arrangement of beams while planning the structure. Although modern engineering primarily focuses on structural safety, load distribution, and scientific design, many people still prefer to incorporate traditional Vastu principles alongside contemporary architectural practices.